Considering that a fileserver at home will spend a lot (most) of its life idle, it makes sense to look at its power usage and see what steps can be taken to reduce its operational costs — i.e. power consumption.
Now that you’ve got your ZFS Home Fileserver up and running and you’ve got your file systems created and shared to other machines on your home network, now’s the time to consider getting some backup policy in place. I’ll show a few different possibilities open to you.
The next step in setting up your own ZFS home fileserver is to set up your ZFS storage pool and file systems and then share them with other machines. The ZFS commands should work from any operating system where ZFS is available. I have used two machines in this example: a machine running Sun Solaris […]
After deciding that I would use Sun Solaris and its ZFS file system as the foundation for a home fileserver, the next part was to select compatible hardware, as Solaris has fairly limited driver support for hardware.
After reading an article that turned out to be pure gold, namely: A Conversation with Jeff Bonwick and Bill Moore – The future of file systems, I felt a warm glow inside and realised that ZFS seemed to be the best solution currently available for solving a number of current problems, and I wanted to […]
When I began my search for a suitable fileserver, I found the choice of available technologies and products quite overwhelming, with each having their own pros and cons. Here is a list of things I considered:
Before embarking on this project I asked myself what I needed a fileserver for. That is, what would I put on there and, therefore, how much storage space would I require.
For many people who use a computer, knowing where to store growing amounts of data can become tricky. You start off with one disk, run out of space, buy a bigger one etc. And if you have a camcorder you’ll be generating gigabytes of data for every Mini DV tape you record. Also, you may […]